‍

‍

Installing a television in a home on drywall with wooden studs can be a great way to enhance your home theatre experience. With the right tools and steps, you can easily mount your TV on the wall and enjoy your favorite shows and movies in comfort. In this blog post, we will take you through a step-by-step process to install a TV on drywall with wooden studs, including how to choose the right TV mount and tools, how to find the right spot to install the TV, and how to mount the TV safely and securely.

‍

Read More: The Pros and Cons of TV Mounting

‍

Follow These Simple Steps to Properly Mount Your TV

Step 1: Choose the Right TV Mount 

Before you start the installation process, you need to choose the right TV mount for your TV. There are three main types of TV mounts: fixed, tilting, and full-motion. Fixed TV mounts hold the TV in a fixed position and are ideal for TVs that are installed at eye level. Tilting TV mounts allow you to adjust the angle of the TV up or down, which is useful if you need to mount the TV higher than eye level. Full-motion TV mounts allow you to adjust the angle and position of the TV in all directions, making them the most versatile option.

‍

‍

When choosing a TV mount, you should consider the size and weight of your TV, as well as the VESA pattern, which is the pattern of mounting holes on the back of your TV. You should also choose a mount that is compatible with your drywall and wooden studs.

Step 2: Gather the Right Tools 

Once you have chosen the right TV mount, you need to gather the right tools to install the mount. You will need a stud finder, a drill, a level, a pencil, a measuring tape, a screwdriver, and the mounting hardware that came with your TV mount. You may also need a hammer, a saw, and a power drill if you need to make any adjustments to the wall or studs.

Step 3: Find the Right Spot to Install the TV 

Before you start drilling into the wall, you need to find the right spot to install the TV. You should choose a spot that is at eye level when you are sitting down, and that is not too close to any windows or doors. You should also make sure that there is enough space for the TV and that the cables can reach the TV from your other devices.

‍

To find the right spot, use a stud finder to locate the wooden studs in the wall. You should aim to mount the TV bracket onto at least two studs for maximum stability. If you cannot find two studs in the right location, you may need to use drywall anchors to mount the bracket securely

Step 4: Install the TV Mounting Bracket 

Once you have found the right spot, you can start installing the TV mounting bracket. First, use a stud finder to locate the wall studs in the area the TV will be mounted. Make a pencil mark on each side of two studs (need two studs side by side) to see the full stud location on the wall. Hold the bracket up to the wall and use a level to make sure it is straight. Then, use a pencil to mark the location of the screw holes on the wall. You must mark the holes in the center of the wooden studs (the screw holes on the mount will line up).

‍

Next, drill pilot holes into the wall at the marked locations. Make sure the drill bit is slightly smaller than the screws that came with your TV mount. Then, attach the mounting bracket to the wall using the screws and a screwdriver. Make sure the bracket is securely attached to the wall and that it is level.

Purchase a wall level here

Step 5: Attach the TV to the Mounting Bracket

Once the mounting bracket is securely attached to the wall, you can attach the TV to the bracket. First, locate the mounting holes on the back of your TV and attach the mounting arms or plate to the TV using the screws provided with your TV mount. Make sure the mounting arms or plate are securely attached to the TV.

Then, lift the TV up and attach it to the mounting bracket on the wall. Make sure the TV is level and centred on the bracket. Finally, use a screwdriver to tighten any screws that need to be tightened to secure the TV in place.

Step 6: Connect Cables and Power

With the TV securely mounted on the wall, the next step is to connect the cables and power. Make sure you have the right cables for your devices, such as HDMI or coaxial cables, and that they are long enough to reach the TV from your other devices. Connect the cables to the appropriate ports on the TV and any other devices you want to use, such as a soundbar or gaming console.

‍

‍

Once the cables are connected, plug the TV into a power outlet and turn it on. Check to make sure the TV is working properly and that all of the cables are connected correctly.

Step 7: Clean Up

Once the TV is installed and working properly, it's time to clean up. Remove any packaging or protective materials from the TV and mounting bracket. Use a vacuum or broom to clean up any dust or debris from the installation process. Finally, dispose of any unused materials or packaging.

‍

Final Thoughts

In conclusion, installing a TV on drywall with wooden studs can be a simple process if you have the right tools and follow the right steps. Remember to choose the right TV mount for your TV and the right tools for the job. Find the right spot to install the TV, make sure the bracket is securely attached to the wall, and attach the TV to the bracket. Finally, connect the cables and power, and clean up any debris. If you're not comfortable with DIY, you can always hire a professional TV wall mounting service near you to do the job for you. With your TV mounted securely on the wall, you can sit back, relax, and enjoy your home theatre experience in comfort.

Book a TV mounting service online with our skilled installation professionals to have someone install within the same day.

Don’t waste time, book a TV mount appointment today